GigaSwitch V5 230VAC Series

Products

GigaSwitch V5 SFP-2VI 230VAC

Nexans ref. 88303971

  • Packaging: Unit

GigaSwitch V5 TP SFP-VI 230VAC

Nexans ref. 88303975

  • Packaging: Unit

Description

Description

LANactive 6 Port Managed Full Gigabit Ethernet FTTO Switch

  • 2 Uplink Ports (1x SFP and 1x RJ45 or 2x SFP)
  • Efficient Energy Management
  • Memory Card Slot
  • Wide input voltage range 85 3 240V AC

 

Nexans LANactive GigaSwitch V5 series is designed for the installation in Fibre to the Office (FTTO) networks. The latest generation of FTTO switches is equipped with a state-of-the-art network processor and provides enhanced performance, security and redundancy functionality.

 

6 Port Version

The GigaSwitch version with six ports is part of the latest V5 series. This special variant with two uplink ports allows a redundant connection of the GigaSwitche via fibre optic. All uplinks support Link Aggregation for providing redundancy and double bandwidth up to 2Gbps.

 

Snap-In Installation

The very compact design of the GigaSwitch allows a tool-less snap-in installation into the standard 45 mm cable duct systems or floor boxes without special mounting accessories.

 

Memory Card

The optional memory card automatically saves the complete current configuration and firmware of the device. In case of failure, this feature allows an easy exchange of the hardware without additional configuration. In addition, each memory card can be delivered with its own MAC address that is adopted by the switch.

 

Switch Management and Zero-Touch Configuration

Nexans Device Manager NEXMAN allows a simple and secure configuration of all device parameter of the GigaSwich series. With NEXMAN a larger number of GigaSwitches can be managed and monitored at the same time. In combination with Nexans Zero-Touch Configuration, NEXMAN allows automatic distribution of configurations and firmware updates. A pre-configuration of the switches is not necessary.

Diagnostic Functions (Interfaces)

Digital Diagnostics Monitoring Interface: Yes
Twisted Pair Cable Diagnostic: Yes

General

Dimensions [W x H x D]: 90mm x 45mm x 69mm

Installation Depth: 35mm

Material: zinc diecasting / stainless steel

Colour: Pure White, like RAL 9010

Ambient Temperature: Operation: 0 ... 45°C, Storage: -20 ... 85°C

Relative Humidity: 20 ... 90% (non-condensing)

Weight: 290g

MTBF: > 750,000h

Power Supply

Input Voltage: 85 ... 240V AC (typ. 110V or 230V AC)

Power Consumption: 3.9W (standby) 3 5.0W (typ.) ... 5.7W (fully connected)

Heat Output: 20Btu(IT)/h

Connector: 3-pin connector with plug-in screw terminal (up to 2.5mm²) / (+) (-) (FPE)

CE - Conformity

Electro Magnetic Capability Directive: 2014/30/EU

Low Voltage Directive: 2014/35/EU

RoHS: 2 2011/65/EU

Switching Parameters

Switching Type: Store-and-Forward, self-learning
Max. Frame Size: 9.600Bytes (Support of Jumbo frames)
Packet Buffer: 512kBytes
Latency (RFC1242): 100Mbps / 64Byte (FIFO/LIFO) 9ìs / 9.3µs | 100Mpbs / 1518Byte (FIFO/LIFO) 125µs / 4µs | 1000Mbps / 64Byte (FIFO/LIFO) 2.7µs / 2.2µs | 1000Mpbs / 1518Byte (FIFO/LIFO) 15µs / 2.5µs
MAC-Address Table: 8.192 MAC-Addresses
VLANs: IEEE802.1q with up to 256 Groups
Quality of Service Layer 2: IEEE802.1p Class of Service (4 Queues per Port)
Quality of Service Layer 3: RFC2474/3168 DSCP (4 Queues per Port)
Bandwidth Limitation: Bitrate and Number of Packets
Fabric Attach: Basic Fabric Attach Client Support

Management

LEDs: Management, Port Status and Activity, Memory Card
Zero-Touch Configuration: Via LANactive Manager
IP-Address: IPv4, IPv6
DHCP-Client: DHCP, DHCPv6
DHCP Relay Agent: Yes
File Transfer: TFTP, SCP
Console Port: V.24 with Nexans Console Cable
Web-Interface: HTTP, HTTPS
Command Line Interface: SSH, Telnet
SNMP: SNMPv1, v2c, v3
Further Management Protocols: Syslog, LLDP, LLDP-MED, CDP
Time Synchronisation: SNTP
Port Statistics: Detailed per Port

Redundancy

Redundancy Protocols: STP, RSTP, MSTP, MRP
Link Aggregation: LACP

Security

Password Protection: Two Access Levels (R/W or R/O)
Authentication via Radius: CLI and NEXMAN
Authentication via TACACS+: CLI and NEXMAN
ACL for Management Interface: Up to 16 Access Control Lists
Portsecurity via MAC-Address: Up to 3 predefined MAC-Addresses
Portsecurity via Radius: IEEE802.1x
DHCP Snooping: Yes
Loop and Broadcast Limiter: Yes
Firmware Update: Dual Firmware Image
Configuration Button: Yes (configuration button deactivatable)
Reset Button: Yes (configuration button deactivatable)
Memory Card: Micro SD-Card, optionally with fixed MAC-Address

Resources

Resources

Documentation

Datasheet pdf — 245.7 kB

Contact us

Topics on which you wish to get more informations:

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close

Contact us

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close